PFC2-50kVAr 75A 415V

Description

The PFC2 Series Power Factor Switches provide precise and efficient switching for three-phase capacitive loads, enhancing power factor correction and reducing energy waste. Using the two-leg control technique, these controllers offer optimised capacitor switching with minimal inrush current. The PFC2 30kVAR & 50kVAR models feature integrated semiconductor fuses, an automatic resetting temperature trip, and fan cooling (on the 50kVAR model).

Key Features

Enhanced Power Factor Correction – Optimises electrical efficiency and reduces reactive power.
Low Inrush Current – Eliminates high start-up currents for capacitor banks.
Rugged & Reliable – High-speed semiconductor fuses and enclosed panel mounting.
Automatic Overtemperature Protection – Trips at 90°C and resets at 85°C.
LED Status Indicators – Monitor power, faults, signal, and capacitor discharge.
Multiple Control Options – Accepts 8-24V DC signals for seamless integration.
Alarm Relay Function – Voltage-free relay for real-time fault detection.
50kVAR Fan Cooling – Automatically activates at 55°C to ensure longevity.

Applications

Ideal for power factor correction (PFC) in capacitor banks, these solid-state controllers are widely used in:

• Industrial power systems
• Welding plants
• Lifts & cranes
• Wind turbines
• High-power capacitive loads

Technical Specifications

• Power Rating: 50kVAR (75A) @ 415V RMS
• Input Voltage: 415V RMS ± 10%
• Frequency: 50/60Hz
• Control Signal Input: 8-24V DC, Common 0V or +VE, Open Collector or Volt-Free Contact
• External DC Supply: 24V DC (250mA) for fuse failure monitoring
• Cooling Fan: 24V DC (50kVAR model only), activates at 55°C
• Overtemperature Trip: 90°C, reset at 85°C
• Phase Loss Detection: LED indicators flash for phase loss or fuse failure
• Alarm Relay: 125V AC @ 2A voltage-free contacts
• Power Terminations: 16mm² rising clamp terminals (supply, load, earth)
• Signal Terminations: 2.5mm² rising clamp terminals (remote supply, control signal, auxiliary alarm)
• Protection Rating: IP20
• Fusing:
  • 50kVAR: 100ET (100A) High-Speed Semiconductor Fuse
• Dimensions:
  • 50kVAR: 250mm (D) x 155mm (W) x 120mm (H)
• Fixing Centres: 4 x 4.5mm keyhole slots, 140mm (W) x 140mm (D)
• Weight: 50kVAR – 3.4kg

Why Choose the PFC2 Power Factor Controller?

The PFC2 Series delivers efficient power factor correction, reduced inrush current, and seamless switching for high-power applications. With advanced thermal protection, fault monitoring, and robust semiconductor fuses, these controllers ensure long-term reliability and energy efficiency.

Optimise your power system today with the PFC2 Power Factor Switch!

**The four models in this series include the 30kVAR, 50kVAR, 80kVAR and the 100kVAR models, all of which are fan cooled.